Jacek Residence< Images taken 5 years after the installation

This project is another example of our Rock Hard system where we use the same chemicals and similar grinding techniques as our Polished system. The floor was done back in 2010. The images were taken 5 year later in 2015. We like to follow our projects for 5, 10, and 15 years to see how they are holding up. We pored the floor over radiant heat tubing. We used dust on Color Hardener for the base color of the Concrete. Next, after a few weeks cure time, We lightly ground the floor with a # 30 grit Res/Met Diamond pads. We were looking for a light cream finish with no large aggregate exposure. (See Close Up Photo). Next, We continued polishing the floor with # 50, 100, and 200 grits. The reason that we stopped the polishing process at #200 grit is because the owner wanted a low gloss, Semi gloss shine, over a highly mirrored and polished floor. Next. We applied Multi Colored SB. dye stains. Next, We applied Lithium Densifier. Next, We applied our Hybrid floor hardener and Burnished.